Longitudinal finned tube

发布日期:2020-05-21 15:29:27

Jiangsu dingxiang energy saving technology co., ltd. is a professional manufacturer, we provide product-related orders, pictures, prices and after-sales consulting services, welcome to inquire!

As with welded spiral finned tubes, this welded structure can be used for virtually any heat transfer application. The choice between longitudinal finned tube and spiral finned tube seems to depend mainly on geometric factors. For example, some heater structures consist of finned tubes inserted into other tubes -- longitudinal finned tubes are an obvious choice for such applications. In other cases, users prefer the longitudinal finned tube installation, where the tube will be in a vertical direction - the finned direction facilitates fluid drainage on one side of the finned tube. Longitudinal finned structures are most commonly used in shell and tube applications, such as in double-tube and multi-tube heat exchangers, where the longitudinal finned tube is telescopic in the hole of a larger tube shell. Heat is transferred between the fluid flowing through the finned tube hole and the fluid flowing through the shell hole. The fluid flowing through the shell hole is forced to flow between the longitudinal fins. In this case, the spiral fin prevents the flow of the fluid, rather than allowing it to flow between the fins.

W USES finned tubes

Improve heat transfer efficiency in efficient space.

Reduces installation space on required heat transfer surfaces

Reduce the cost of the equipment, and have a high operational reliability.

The pressure drop on the side of the tube is reduced and the operation cost is reduced.

The stiffness of steel tube is improved, and the seismic performance of steel tube is improved.

Enhance heat transfer, reduce flow resistance and metal consumption

Manufacturing process

Longitudinal finned tubes are produced by welding the fins with resistance along the length of the tube. The fins first form a u-shaped channel, allowing each of the u-shaped legs to form a fin. The channel is cut to the appropriate length and then welded into place along the length of the tube and resistance. The channels are a pair of welded, polar opposites, so the number of fins specified must be a multiple of four.

For a given tube or tube size, the desired heat transfer surface area per tube unit length can be obtained by specifying the appropriate fin height and number of fins. The maximum number of fins depends on the outer diameter of the tube - the larger OD tube can accommodate more fins.


ADDRESS:No.2, Xingyuan West Road, industrial cluster district, Yuanzhu Town, Taixing City, Jiangsu Province. Post Code : 225412

Toll-free Hotline: +86 158 9547 5675

Service Time

7 * 24 Hours